The behaviour of geometrically-reinforced thin plates under thermoacoustic loading: A comparison of additive and subtractive manufacturing

John Lambros, Ceri A. Middleton, Eann A. Patterson, Melissa Weihrauch, Department of Aerospace Engineering, University of Illinois Urbana-Champaign, Department of Mechanical and Aerospace Engineering, University of Liverpool

Journal of Vibration and Control

Published online on February 20, 2026

Abstract

Journal of Vibration and Control, Ahead of Print.
Additive manufacturing (AM) is gaining in popularity as an approach to producing metallic components of complex geometry relatively cheaply and rapidly from digital representations. However, concerns about the impact of residual stresses induced by ...